How To Make Automatic Chicken Feeder: A Step-By-Step Guide

Keeping chickens is a fun and rewarding hobby, but it can also be a lot of work. One of the most time-consuming tasks is feeding them every day. Fortunately, you can save yourself time and effort by making an automatic chicken feeder. In this article, we'll show you how to make one using simple materials and tools.

Materials Needed

Here are the materials you'll need to make an automatic chicken feeder:

1. A plastic container with a lid
2. A PVC pipe that fits into the lid
3. A PVC elbow joint
4. A PVC cap
5. A small piece of screen mesh
6. A glue gun or PVC cement
7. Chicken feed

Tools Needed

Here are the tools you'll need to make an automatic chicken feeder:

• A drill
• A jigsaw or handsaw
• A hot glue gun or PVC cement applicator

Step-by-Step Instructions

Follow these steps to make your own automatic chicken feeder:

Step 1: Cut the PVC Pipe

Using a jigsaw or handsaw, cut the PVC pipe to a length of about 12 inches. This will be the feeder tube that dispenses the chicken feed.

Step 2: Drill Holes in the PVC Pipe

Using a drill, make several small holes in the PVC pipe. These holes will allow the chicken feed to fall out of the feeder tube.

Step 3: Attach the PVC Elbow Joint

Attach the PVC elbow joint to one end of the PVC pipe. This will allow you to attach the feeder tube to the lid of the plastic container.

Step 4: Attach the PVC Cap

Attach the PVC cap to the other end of the PVC pipe. This will prevent the chicken feed from spilling out of the end of the feeder tube.

Step 5: Cut a Hole in the Plastic Container Lid

Using a jigsaw or handsaw, cut a hole in the center of the plastic container lid. The hole should be just big enough to fit the PVC pipe.

Step 6: Attach the PVC Pipe to the Lid

Insert the PVC pipe into the hole in the plastic container lid. Use a hot glue gun or PVC cement applicator to secure the PVC pipe to the lid. Make sure the PVC elbow joint is facing down into the container.

Step 7: Add the Screen Mesh

Cut a small piece of screen mesh to fit over the end of the PVC pipe. This will prevent the chicken feed from getting stuck in the feeder tube. Use a hot glue gun to attach the screen mesh to the end of the PVC pipe.

Step 8: Fill the Feeder with Chicken Feed

Pour chicken feed into the plastic container. The feed will fill up the feeder tube and eventually fall out of the holes in the pipe.

Step 9: Test the Feeder

Hang the feeder from a tree or post in your chicken coop. Make sure the chicken feed is falling out of the feeder tube and into the container. Adjust the size of the holes in the PVC pipe if necessary.

People Also Ask

Here are some common questions people ask about making automatic chicken feeders, along with their answers:

• What materials do I need to make an automatic chicken feeder?

  You'll need a plastic container with a lid, a PVC pipe, a PVC elbow joint, a PVC cap, some screen mesh, and chicken feed.

• Do I need any special tools to make an automatic chicken feeder?

  You'll need a drill, a jigsaw or handsaw, and a hot glue gun or PVC cement applicator.

• How much chicken feed can an automatic feeder hold?

  It depends on the size of the plastic container you use. A larger container will hold more feed.

• How do I adjust the size of the holes in the PVC pipe?

  You can use a drill bit to make the holes larger or smaller, depending on how much feed you want to dispense at a time.

FAQ Page

Conclusion

Making an automatic chicken feeder is a great way to save time and effort when caring for your chickens. With just a few simple materials and tools, you can create a feeder that dispenses chicken feed automatically. Follow the step-by-step instructions in this article to make your own feeder and enjoy more free time with your feathered friends!